Q-Man Oiler Premium Android

Q-Man Oiler Premium Android
Ladies and Gentlemen, because Q-Man Oiler enjoys more and more recognition of customers, as well as growing interest in our product, we decided to meet your expectations and created a new version of the product under the name Q-Man Oiler Premium Android - the first such system managed from the android application. As for the technological aspect regarding the method of monitoring the lubrication process itself, it has remained unchanged, while the communication system with the ANDROID application is added, which gives the possibility of:
lubrication intensity control (+ 50% and -50%)
reading the current battery-charging voltage
monitoring the amount of lubricating oil in the reservoir
monitoring the distance traveled since the last filling of the oil tank
change of work mode to temporary
monitoring the current speed
starting the service mode
adjustable meter of the distance traveled
the maximum speed with which the motorcycle moved within the distance of the adjustable meter
indicates each oil feeding process
We want to reassure those who have already purchased the Q-Man Oiler system, that the change to the Premium option will only involve the change of the driver. All other hardware and cabling remain unchanged. The shape, as well as the way of fixing the controller, are also changed.

staff
We download the application from the site in the download section, or via Google Play under the name Q-man Oiler. We install the application and go to pairing the device with the application. Pairing is carried out with the controller powered on (the ignition of the motorcycle switched on). Bluetooth "1234" pairing code. After pairing the device with the controller (the evaporation process described in the manual), the system will be available in bluetooth connections under the name Q-Man Oiler.
Then we launch the application on the phone and click on connect options. After the connection, the system will turn yellow with active functions and it is ready to work. Of course, when the system is started by default, it is set in accordance with the description of the entire Q-Man Oiler operation process - in standard mode and the change in settings while driving is reset to the standard settings after switching off and subsequent ignition of the motorcycle. Some available options, due to protection against accidental switching or resetting, require acknowledgment in order to run them.
ATTENTION
The system does not require every time the phone connects to the device!
Even if for a certain period of time we will not be able to pair the device with the application, after the next connection the application will be checked for kilometers traveled, the amount of oil used, etc.
Application tabs are simple, clear and intuitive and should not be difficult to use, but the attention needs to be made for the tab CONFIGURATION.
By default, the system is configured to the diameter of the rear 17-inch wheel and 5 pins of the signal coming from the wheel sensor.
Any deviations related to these assumptions will result in a "crossover" in reading data. This tab is used to correct this type of deviations, which should be selected and remembered at its own discretion. The capacity coefficient, on the other hand, concerns the possible change of the used oil container and is configured to the volume delivered in a 200ml container.
The application allows you to continually drive with the ability to monitor parameters and at the same time set up a bluetooth connection, it does not block the possibility of using a phone also connected by bluetooth to other devices, such as a hands-free kit in a helmet.
Other parameters and the method of assembly remain the same as in the previous version
The android-managed system also makes it impossible to install a multifunction switch, because all its functions are in the field of android. This simplifies the assembly, but we recommend a complete system with a switch.